Known bugs

Known bugs

Postby Daven » Tue Sep 03, 2013 9:48 pm

Updated 2014-03-21

Bugs

Windows: save preset dialog sometimes pops up when enabling impulse modeller (???)
Windows: crash on samplerates =/= 44100 in some conditions (could be cpu based; I think this needs an updated IPP license, will do when possible but could be a wait)
Faulty collision detection on spliced lines (wave-shape vertex paths that wrap across the horizontal boundary)


Usability Wants

Axe tool more intuitive with scratch envelope enabled

Resolved but unverified

OSX: Save Preset dialog pops up behind the plugin in Logic X

-------
Feel free to report any more here.
Daven
Site Admin
 
Posts: 195
Joined: Fri May 17, 2013 12:05 am

Re: Known bugs

Postby wasi » Sat Sep 07, 2013 11:04 am

I also get stuck envelopes when changing envelopes while sounding a note. No biggie, but maybe it's related.
wasi
 
Posts: 21
Joined: Thu Aug 22, 2013 7:51 am

Re: Known bugs

Postby wasi » Wed Sep 11, 2013 9:35 am

I get consistent crashes at sample rates higher than 44.1kHz, both standalone and hosted in 64bit hosts.

Behaviour:
Plugin:
- Set sample rate to 48kHz or 96kHz in host
- start plugin
- plugin crashes itself and host immediately in Live 9 64bit and Reaper64

Standalone:
- Start Cycle
- open audio settings, set audio interface and/or sample rate to >44.1
- standalone then sometimes reports "can't create i/o buffers", trying again usually works, test tone works,
- close settings dialog
- press a note or two and it crashes.

Windows 8.1 pro 64bit, Rig Control 2 interface (sorry, my other interface is 44.1 only to I can't cross check)
wasi
 
Posts: 21
Joined: Thu Aug 22, 2013 7:51 am

Re: Known bugs

Postby Daven » Wed Sep 11, 2013 4:29 pm

Right, I definitely need to test other samplerates more. I don't think those crashes are host or platform specific, just oversights.
Daven
Site Admin
 
Posts: 195
Joined: Fri May 17, 2013 12:05 am

Re: Known bugs

Postby wasi » Sun Sep 15, 2013 12:36 pm

Hm, I get nasty artifacts/aliasing when I run the 'Acidic *' presets in hosted mode. They sound very clear and full in standalone, but hosted they're, noisy, 'fizzy' and muffled. This is both in Live 9, Renoise and Reaper (all x64).

It seems to be related to something these presets do. The other presets work ok (haven't tried them all yet though).
wasi
 
Posts: 21
Joined: Thu Aug 22, 2013 7:51 am

Re: Known bugs

Postby Daven » Sun Sep 15, 2013 12:54 pm

Could you try toggling the impulse response? It's probably related to that.

I tried with Live 9 here, didn't see it. What was the audio buffer size you're running?
Daven
Site Admin
 
Posts: 195
Joined: Fri May 17, 2013 12:05 am

Re: Known bugs

Postby wasi » Sun Sep 15, 2013 1:00 pm

Daven wrote:Could you try toggling the impulse response, see if that is the source of the noise?

Nope, it's the antialiasing on the waveshaper. Set that to 1x and it's fine. 8-)

It's worst on 2x (what the preset uses). 8x is very dark but not as noisy, 4x is pretty bad.
wasi
 
Posts: 21
Joined: Thu Aug 22, 2013 7:51 am

Re: Known bugs

Postby Daven » Sun Sep 15, 2013 2:04 pm

wasi wrote:
Daven wrote:Could you try toggling the impulse response, see if that is the source of the noise?

Nope, it's the antialiasing on the waveshaper. Set that to 1x and it's fine. 8-)

It's worst on 2x (what the preset uses). 8x is very dark but not as noisy, 4x is pretty bad.



Gotcha. I need to reproduce this, so can you tell me your audio settings? I tried with Reaper x64 still nothing :(
Daven
Site Admin
 
Posts: 195
Joined: Fri May 17, 2013 12:05 am

Re: Known bugs

Postby wasi » Sun Sep 15, 2013 2:15 pm

Hm, odd.

44.1 kHz, buffer at 256 or 512.

It's the same everywhere except in standalone (through the same devices).

64bit win8.1
wasi
 
Posts: 21
Joined: Thu Aug 22, 2013 7:51 am

Re: Known bugs

Postby Daven » Sun Sep 15, 2013 6:05 pm

New installer soon, may have a fix...
Daven
Site Admin
 
Posts: 195
Joined: Fri May 17, 2013 12:05 am

Next

Return to Cycle

Who is online

Users browsing this forum: No registered users and 2 guests

cron